Wire Drawing Machine

Product Details:

We are leading manufacturer and exporter of Automatic Wire Drawing Machine.

 
Features :

Our Wire Drawing Machines have a Main Body with base, drawing drum and drawing die box of close grain Cast Iron. A Water Cooling arrangement provided inside the Drawing Drum and the Die Box. Phosphorous bronze gears with high carbon axle steel worms are provided.This machine suitable for drawing Wires from 8mm or 6mm to 2 mm. It is suitable to draw wires used to make Barbed Wire, Wire Mesh, Nails, etc. Wet / Slip type Fine Wire Drawing Machines are also available. Details can be provided on request

Operation:

The wire rod to be drawn is pointed in the Wire Pointing Machine. This pointed wire is inserted through the die of the first Wire Drawing Machine and fastened to a locking device on the drum. The drum is then started. As the drum rotates, the wire fastened to the drum gets pulled and coiled around the drum. Since the wire getting pulled is passed through the die having a higher inlet diameter and a lower outlet diameter, the drawn wire diameter gets reduced.

 

The starting end of the drawn wire is released from the lock of the first drum, is passed through the overhead loop and pulley provided, is brought down and is inserted through the die of the second drum and drawn through this die for further reduction.

 

Thus, the wire is drawn through all the wire drawing drums of the set in a continuous manner to get the required finished diameter of the wire. When the drum of the last wire drawing machine gets fully loaded with the drawn wire, the machine will be stopped to unload the finished material and then restarted.

 

When the bundle of input rod finishes, the machine should be stopped. The end of this bundle is welded to the end of a new bundle of rod using the butt welding machine. Then the process is to be continued.

Also, in case of an accidental snapping of wire in between drums, the snapped ends are welded with the help of the butt welding machine and the process is continued.

Specifications:

Product Details:

Wire drawing is a metalworking process used to reduce the cross-section of a wire by pulling the wire through a single, or series of, drawing die(s). There are many applications for wire drawing, including electrical wiring, cables, tension-loaded structural components, springs, paper clips, spokes for wheels, and stringed musical instruments. Although similar in process, drawing is different from extrusion, because in drawing the wire is pulled, rather than pushed, through the die. Drawing is usually performed at room temperature, thus classified as a cold working process, but it may be performed at elevated temperatures for large wires to reduce forces.

Product Details:

We are offering Automatic Wire Drawing Machine.

Additional Information:

• Item Code: SE-750